Printers
- PolyJet Legacy Printers
- Alaris30 V1
- Connex260
- Connex350/500
- Eden250
- Eden260
- Eden260V/VS
- Eden330
- Eden350
- Eden350V/500V
- J700 & J720 Dental
- J750/J735
- J750 Digital Anatomy
- Objet24/30 V2 Family
- Objet24/30 V3 Family
- Objet30 V5 Pro & Prime
- Objet260 Connex 1-2-3
- Objet260 Dental & Dental Selection
- Objet350/500 Connex 1-2-3
- Objet1000 Plus
Materials
- PolyJet Materials
- Agilus30 family
- Biocompatible
- Biocompatible Clear MED610
- Dental Materials
- Dental TrueDent Materials
- Dental TrueDent-D Materials
- Digital ABS Plus
- DraftGrey
- Elastico Clear/Black
- High Temperature
- MED610-DSG
- PolyJet Support
- Rigur & Durus
- Tango
- PolyJet ToughONE™
- Transparent
- Vero ContactClear
- Vero Family
- Veroflex
- VeroUltra Opaque
- Vivid Colors
- Stereolithography Materials
- Somos® 9120™
- Somos® BioClear™
- Somos® DMX SL™ 100
- Somos® Element™
- Somos® EvoLVe™ 128
- Somos® GP Plus™ 14122
- Somos® Momentum™
- Somos® NeXt™
- Somos® PerFORM™
- Somos® PerFORM Reflect™
- Somos® ProtoGen™ 18420
- Somos® ProtoTherm™ 12120
- Somos® Taurus™
- Somos® WaterClear® Ultra 10122
- Somos® WaterShed® AF
- Somos® WaterShed® Black
- Somos® WaterShed® XC 11122
- Somos® WaterShed® XC+
F870 3D Printer Support
The Stratasys F870™ is a large-format FDM® 3D printer designed for reliable production of large parts. The system combines a fully heated build chamber with integrated material drying, automatic material changeover, and four high-capacity material bays to support consistent print quality during extended builds.
Specifications at a Glance
| Build Envelope | 1,000 × 610 × 610 mm (39.4 × 24 × 24 in.); maximum diagonal: 1,171 mm (46.1 in.) |
| Layer Thickness | 0.18 mm (0.007 in.), 0.25 mm (0.010 in.), and 0.33 mm (0.013 in.), depending on material. |
| Software | GrabCAD Print™, GrabCAD Print Pro™, Insight™, Control Center™, MTConnect-enabled |
| Materials | ABS Draft, ABS-M30, ASA, FDM Nylon 12CF; SR-35™ soluble support |
| Applications | Functional prototypes, manufacturing, jigs and fixtures, tooling, spare parts, and obsolete-part replacement |
See F870 spec sheet for all specifications.
Frequently Asked Questions
- ⮞Can an F770 be upgraded to an F870?
No. The F870 uses different electronics and control systems, so the F770 cannot be converted to an F870 through a hardware upgrade. - ⮞Can I use F770 print heads, build sheets, or material on the F870?
F770 “T” style print heads are not compatible; the F870 uses “N” style heads designed for larger F3000 Series filament. Standard F770 build sheets are compatible with ASA, ABS-M30, and ABS Draft. Nylon 12CF requires a dedicated nylon build sheet. - ⮞How should I store partially used material spools?
Store partial spools in a sealed, dry container or bag with desiccant to prevent moisture absorption. Proper storage helps keep the filament dry and ready for reuse. - ⮞What should I do with material when the F870 has been idle or powered off?
After more than four hours idle, unload the material, remove about 3 m (10 ft) of filament, and reload it before printing. If the printer has been powered off for more than one hour, check the filament moisture or dry it for 10 hours before use.
Get a Quote for this Printer.
Buy Stratasys Materials and Service Consumables in Our Online Store