DEMI X 5000 - SLA Post Processing

The DEMI X 5000 is an automated resin removal system designed for post-processing large-format SLA 3D printed parts. It uses Submersed Vortex Cavitation (SVC), controlled agitation, temperature, and PostProcess detergent to remove uncured resin from SLA parts.

Product Specification:

Processing envelope	89 × 89 × 63.5 cm (35 × 35 × 25 in)
Maximum fixture load	90 kg (200 lb)
Liquid capacity	1,041 L (275 gal)
Consumable	PLM-403-SUB
Software	AUTOMAT3D
Connectivity	USB 3.1 and Ethernet
Operating environment	5–40°C (41–104°F), 0–80% relative humidity

Frequently Asked Questions

⮞What detergent does the DEMI X 5000 use?
The DEMI X 5000 uses PLM-403-SUB detergent for SLA resin removal. Only PostProcess-approved consumables should be used in the system.

⮞How do I adjust the resin removal process?
AUTOMAT3D allows operators to configure processing parameters including agitation, temperature, lift height, and cycle time. Settings can be saved as recipes for repeatable processing.

⮞What should I check if detergent flow decreases?
Verify the agitation pump is running, check system pressure, and inspect the tank screen filter for residue buildup. Clean the filter when required.

⮞How often should the filter screens be cleaned?
The filter screens should be cleaned weekly or daily depending on machine usage.

Get a Quote for this product.